Congratulations on your new VOVO Integrated Smart Bidet! Ready to upgrade your bathroom experience? You don’t need to be a professional plumber to get this done. Follow this simple guide to install your smart bidet safely and correctly. 🚽✨
📋 1. Pre-Installation Checklist
Before you begin, please ensure you have the following:
-
✅ Water Pressure: Check if your home water pressure is between 20 psi – 75 psi.
-
✅ Electrical Outlet: A grounded GFC outlet (120V) should be within reach of the power cord.
-
✅ Tools Needed: Wrench, screwdriver, and a bucket (to catch excess water).
🚿 2. Installation Steps
Step 1: Remove Your Old Toilet
-
Shut off the water supply valve completely.
-
Flush the toilet to drain the tank and use a sponge or bucket to remove any remaining water.
-
Disconnect the water hose and unscrew the floor bolts to remove the old unit.
Step 2: Install the Flange & Bolts
-
Clean the floor area and ensure the flange is in good condition.
-
Position the floor bolts into the flange slots.
-
Place the new wax ring (or rubber gasket provided) securely over the flange.
Step 3: Position the Ceramic Base
-
Carefully lift the ceramic base and align the bottom holes with the floor bolts.
-
Lower the base onto the wax ring and apply firm pressure to create a seal.
-
Tighten the nuts on the floor bolts (do not overtighten to avoid cracking the ceramic).
Step 4: Connect the Water Line
-
Connect the T-valve to your water supply shut-off valve.
-
Connect the bidet’s water hose to the T-valve and the bidet inlet.
-
Pro Tip: Make sure the mesh filter is properly placed in the inlet to prevent debris from entering the unit. 🛡️
Step 5: Mount the Bidet Top Unit
-
Slide the Top Unit (seat) onto the ceramic base until you hear a "click."
-
Gently pull forward to ensure it is locked securely in place.
Step 6: Power On & Test
-
Open the water supply valve slowly and check for any leaks. 💧
-
Plug the power cord into the outlet.
-
Use the remote control to test the Auto Flush, Nozzle, and Heated Seat functions.
💡 3. Important Maintenance Tips
-
🧼 No Harsh Chemicals: Clean the seat with a soft, damp cloth. Avoid using abrasive cleaners that could damage the smart sensors.
-
🔋 Remote Pairing: If the remote doesn't respond, check the batteries (AAA) and follow the manual for quick pairing.
-
🔇 Soft Close: Never force the lid shut manually; let the Soft Close motor handle it to prolong the unit's life.
📞 Need Extra Help?
If you encounter any issues during installation, our technical team is here to assist you!
-
📧 Email: support@vovousa.com
Enjoy the ultimate comfort and hygiene of your new VOVO Smart Bidet! 🛁👑