Carro de la compra

Tu carrito esta vacío

Seguir comprando

Smart Bidet Toilet

Frequently Asked Questions

Remote not working.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If power is not supplied to the bidet:
Check if the POWER LED on the main display panel is lit.

3. If the remote control ran out of battery:
Press the buttons on the remote control to see if the LED light on the remote control lights up. If the LED light is off, replace the batteries with new ones.

4. If there is an issue with the remote control buttons:
Turn on the camera function of your mobile phone and aim it at the remote control receiver.
While looking at your phone's screen, repeatedly press the malfunctioning buttons on the remote control.
(If only certain buttons do not emit light, there may be an issue with the remote control.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

Remote not powered.

Problems may arise under the following circumstances:

1. If the remote control ran out of battery:
Press the buttons on the remote control to see if the LED light on the remote control lights up. If the LED light is off, replace the batteries with new ones.

2. If there is an issue with the remote control buttons:
Turn on the camera function of your mobile phone and aim it at the remote control receiver.
While looking at your phone's screen, repeatedly press the malfunctioning buttons on the remote control.
(If only certain buttons do not emit light, there may be an issue with the remote control.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The nozzle does not come out / does not retract.

Problems may arise under the following circumstances:

1. If water is not supplied to the bidet:
Fully open the valve connected to the bidet hose, then unplug the bidet power cord for 1 minute before plugging it back in to supply water to the bidet.

2. If there is a reception failure in the remote control:
Press the LED button on the remote control to verify if the bidet is operational.

3. If the seat sensor does not detect human skin:
How to check if the seat sensor is operational
Press the nozzle cleaning button to check if the nozzle comes out (if the nozzle comes out, it is functioning properly).
After the nozzle comes out, please ensure that the nozzle goes in when you make skin contact with the seat sensor (located on the left thigh area).

* Our bidet requires seat sensor (located on the left thigh area) to detect human skin in order for nozzle function to operate.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The nozzle comes out but no water is coming out. (Low water pressure/Weak pressure)

Problems may arise under the following circumstances:

1. If the water supply valve is not fully open (if the water pressure at your home is less than 14.2psi):
Please fully open the valve connected to the bidet hose.
- Check the water pressure at your home. (If the water pressure is less than 14.2psi, the water sprayed from the nozzle may be reduced.)

2. If the nozzle water pressure setting is at level 1:
Adjust the water pressure using the remote control before use.

3. If there is debris in the mesh:
Detach the water supply hose, clean the mesh, and then use it. (Refer to the mesh cleaning guide)

4. If the bidet water supply hose is bent or the water supply hose assembly is incorrect:
Check if the water supply hose is tangled or bent before use.
Detach the water supply hose and check the rubber packing on the hose before use. (Bidet hose check guide)

5. Please check if the power saving mode is on.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The posterior/feminine/turbo wash function is not working.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If there is a reception failure in the remote control:
Press the LED button on the remote control to verify if the bidet is operational.

3. If the seat sensor does not detect human skin:
Press the nozzle cleaning button to check if the nozzle comes out (if the nozzle comes out, it is functioning properly).
(Our bidet requires seat sensor (located under your left thigh area) to detect human skin in order for nozzle function to operate.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The water is not warm.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If the warm water temperature setting is at level 0:
Adjust the warm water temperature to levels 1 to 3 using the remote control before use.
(It takes approximately 3 to 4 minutes to heat the water. Please wait for 3 to 4 minutes after setting the warm water temperature before use.)

3. If the power-saving mode is activated:
If you have enabled the power-saving mode, please deactivate it.
(Power-saving mode explanation/deactivation guide)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The seat is not warm.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If the bidet seat temperature setting is at level 0:
Adjust the bidet seat temperature to levels 1 to 3 using the remote control before use.
(Please confirm the reception sound (beep) from the bidet when adjusting the seat temperature.)
(It takes approximately 5 minutes to warm up the seat. Please wait for about 5 minutes after setting the seat temperature before use.)

3. If the power-saving mode is activated:
If you have enabled the power-saving mode, please deactivate it.
(Power-saving mode explanation/deactivation guide)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The bidet seat is not staying warm.

Problems may arise under the following circumstances:

1. If the power-saving mode is activated:
If you have enabled the power-saving mode, please deactivate it.
(Explanation/Deactivation guide for power-saving mode)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The drying function is not warm.
The drying air is weak.

Problems may arise under the following circumstances:

1. If there is no power in the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If the drying temperature setting is at level 0:
Adjust the drying temperature to levels 1 to 3 using the remote control before use.
* If the drying temperature is set at level 0 or 1, you may experience weak drying air.
* If the air speed is too strong, it may cause odor to rise, so we have not set the air speed to strong in order to prevent odor from rising.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The bidet unit is leaking from the nozzle or inside the bidet unit.

Problems may arise under the following circumstances:

1. Water pressure check:
If the water pressure at your home is above 85.3psi, it may cause minor leakage. Please lower the water pressure to below 85.3psi before use.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

There is leakage from the bottom of the bidet unit.

Problems may arise under the following circumstances:

1. If the water supply hose is not properly connected:
Close the valve connected to the bidet's water supply hose and reassemble the bidet and the water supply hose. Then check for any leaks.

2. If the connection between the upper bidet unit and the ceramic bowl unit is not properly established:
Reassemble the upper bidet unit and the ceramic bowl unit, then check for any leaks.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The drying function is not working.

Problems may arise under the following circumstances:

1. If there is no power in the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If there is a reception failure in the remote control:
Press the LED button on the remote control to verify if the bidet is operational.

3. If the seat sensor does not detect human skin:
Press the nozzle cleaning button to check if the nozzle comes out (if the nozzle comes out, it is functioning properly).
(Our bidet requires seat sensor (located under your left thigh area) to detect human skin in order for all nozzle function to operate.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The bidet is not functioning.

Problems may arise under the following circumstances:

1. If there is no power in the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If power is not supplied to the bidet:
Check if the POWER LED on the main display panel is lit.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The circuit breaker is tripping.

Problems may arise under the following circumstances:

1. If the power cord is not properly connected:
Ensure that the power plug is securely inserted into the outlet, as loose connections can cause issues.
(Be sure to use an AC 120V~, 60Hz outlet with proper grounding.)

* TCB-090SA/RTB-090WA/PB-707S/PB-101S : 703W
* TCB-8100W/TCB-8100B : 1180W

2. If there are electrical issues with the bathroom outlet:
Disconnect the bidet power plug from the outlet and plug in another electronic device such as a hairdryer to see if the circuit breaker trips.
→ If the circuit breaker trips, contact the building management or an electrician to inspect the electrical outlet.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

Flushing does not work.

The flushing may not operate properly under the following condition:

1. If the toilet bowl is clogged:
Press the jet button on the manual flush button to check if the toilet bowl is clogged.
(If clogged, there will be no water flow, only bubbles.)

2. If the water pressure in the bathroom is low:
2-1. Adjust the water pressure using the valve connected to the bidet's water supply hose.
(Turn counterclockwise to fully open the valve.)
2-2. Remove the pressure reduction valve for flushing.
(Please refer to the troubleshooting guide No. 21 for instructions on removing the pressure reducing valve.)

3. If water is being used elsewhere simultaneously:
Our bidet operates directly from the customer's water pressure. When water is being used elsewhere (washing machine, sink, shower), it may result in reduced water pressure, affecting drainage.

4. If the original water pressure is low:
Check the water pressure at your home.
(If the pressure is less than 40psi, drainage may not be efficient.)
(To confirm the minimum required water pressure: Open the water supply valve fully and collect water in a container for 10 seconds, then check the quantity (0.95gal).)

5. If a dual valve is installed:
Please refer to troubleshooting guide No. 8 for the correct installation status.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

How to clean the nozzle.

The nozzle cleaning method is as follows:

External Nozzle Cleaning (Manual):
Press the nozzle cleaning button on the remote control or control bar to extend the nozzle.
Clean the exposed nozzle with a brush.
After cleaning, press the nozzle cleaning button again to retract the nozzle.

Internal Nozzle Cleaning (Automatic):
Our bidet automatically cleans the interior of the nozzle (posterior, feminine, turbo) once during nozzle usage, and once more after usage is completed.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

How to purchase the parts.

1. Please confirm the model name and purchase through our customer support center.
How to confirm the model name: Check the model name written on the back of the bidet unit.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

TCB-090SA, TCB-090S, PB-707S, PB-101S, TCB-8100W, TCB-8100B

User Manual

Installation Manual

Installation Manual (French)

Quick Guide

 Bidet Toilet Template

Bidet Toilet Seat Template (Elongated, Round)

VB-4000SE, VB-4100SR, VB-3000SE, VB-3100SR, VB-6000SE, VB-6100SR, VB-4000N

User Manual

Installation Manual

Quick Guide

M-001, M-002, M-003

User Manual

User Manual

User Manual

Quick Guide

BD-7700W, BD-7700B, BD-7700G

User Manual

Quick Guide

If you can't solve the problem even after looking at the FAQ,
try using the VOVO chatbot.

Smart Bidet Toilet

Frequently Asked Questions

Remote not working.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If power is not supplied to the bidet:
Check if the POWER LED on the main display panel is lit.

3. If the remote control ran out of battery:
Press the buttons on the remote control to see if the LED light on the remote control lights up. If the LED light is off, replace the batteries with new ones.

4. If there is an issue with the remote control buttons:
Turn on the camera function of your mobile phone and aim it at the remote control receiver.
While looking at your phone's screen, repeatedly press the malfunctioning buttons on the remote control.
(If only certain buttons do not emit light, there may be an issue with the remote control.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

Remote not powered.

Problems may arise under the following circumstances:

1. If the remote control ran out of battery:
Press the buttons on the remote control to see if the LED light on the remote control lights up. If the LED light is off, replace the batteries with new ones.

2. If there is an issue with the remote control buttons:
Turn on the camera function of your mobile phone and aim it at the remote control receiver.
While looking at your phone's screen, repeatedly press the malfunctioning buttons on the remote control.
(If only certain buttons do not emit light, there may be an issue with the remote control.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The nozzle does not come out / does not retract.

Problems may arise under the following circumstances:

1. If water is not supplied to the bidet:
Fully open the valve connected to the bidet hose, then unplug the bidet power cord for 1 minute before plugging it back in to supply water to the bidet.

2. If there is a reception failure in the remote control:
Press the LED button on the remote control to verify if the bidet is operational.

3. If the seat sensor does not detect human skin:
How to check if the seat sensor is operational
Press the nozzle cleaning button to check if the nozzle comes out (if the nozzle comes out, it is functioning properly).
After the nozzle comes out, please ensure that the nozzle goes in when you make skin contact with the seat sensor (located on the left thigh area).

* Our bidet requires seat sensor (located on the left thigh area) to detect human skin in order for nozzle function to operate.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The nozzle comes out but no water is coming out. (Low water pressure)

Problems may arise under the following circumstances:

1. If the water supply valve is not fully open (if the water pressure at your home is less than 14.2psi):
Please fully open the valve connected to the bidet hose.
- Check the water pressure at your home. (If the water pressure is less than 14.2psi , the water sprayed from the nozzle may be reduced.)

2. If the nozzle water pressure setting is at level 1:
Adjust the water pressure using the remote control before use.

3. If there is debris in the mesh:
Detach the water supply hose, clean the mesh, and then use it. (Refer to the mesh cleaning guide)

4. If the bidet water supply hose is bent or the water supply hose assembly is incorrect:
Check if the water supply hose is tangled or bent before use.
Detach the water supply hose and check the rubber packing on the hose before use. (Bidet hose check guide)

5. After using the Turbo wash function, if the water pressure is weak when using the posterior/feminine function;
It may be because the Turbo wash function operates at the lowest pressure setting regardless of the set pressure level (to avoid discomfort in the area). Therefore, please reset the water pressure when reusing the posterior/feminine function.


(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The posterior/feminine/turbo wash function is not working.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If there is a reception failure in the remote control:
Press the LED button on the remote control to verify if the bidet is operational.

3. If the seat sensor does not detect human skin:
Press the nozzle cleaning button to check if the nozzle comes out (if the nozzle comes out, it is functioning properly).
(Our bidet requires seat sensor (located under your left thigh area) to detect human skin in order for nozzle function to operate.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The water is not warm.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If the warm water temperature setting is at level 0:
Adjust the warm water temperature to levels 1 to 3 using the remote control before use.
(It takes approximately 3 to 4 minutes to heat the water. Please wait for 3 to 4 minutes after setting the warm water temperature before use.)

3. If the power-saving mode is activated:
If you have enabled the power-saving mode, please deactivate it.
(Power-saving mode explanation/deactivation guide)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The seat is not warm.

Problems may arise under the following circumstances:

1. If power is not supplied to the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If the bidet seat temperature setting is at level 0:
Adjust the bidet seat temperature to levels 1 to 3 using the remote control before use.
(Please confirm the reception sound (beep) from the bidet when adjusting the seat temperature.)
(It takes approximately 5 minutes to warm up the seat. Please wait for about 5 minutes after setting the seat temperature before use.)

3. If the power-saving mode is activated:
If you have enabled the power-saving mode, please deactivate it.
(Power-saving mode explanation/deactivation guide)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The bidet seat is not staying warm.

Problems may arise under the following circumstances:

1. If the power-saving mode is activated:
If you have enabled the power-saving mode, please deactivate it.
(Explanation/Deactivation guide for power-saving mode)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The drying function is not warm.
The drying air is weak.

Problems may arise under the following circumstances:

1. If there is no power in the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If the drying temperature setting is at level 0:
Adjust the drying temperature to levels 1 to 3 using the remote control before use.
* If the drying temperature is set at level 0 or 1, you may experience weak drying air.
* If the air speed is too strong, it may cause odor to rise, so we have not set the air speed to strong in order to prevent odor from rising.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The bidet unit is leaking from the nozzle or inside the bidet unit.

Problems may arise under the following circumstances:

1. Water pressure check:
If the water pressure at your home is above 85.3psi, it may cause minor leakage. Please lower the water pressure to below 85.3psi before use.

(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

There is leakage from the bottom of the bidet unit.

Problems may arise under the following circumstances:

1. If the water supply hose is not properly connected:
Close the valve connected to the bidet's water supply hose and reassemble the bidet and the water supply hose. Then check for any leaks.

2. If the connection between the upper bidet unit and the ceramic bowl unit is not properly established:
Reassemble the upper bidet unit and the ceramic bowl unit, then check for any leaks.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The drying function is not working.

Problems may arise under the following circumstances:

1. If there is no power in the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If there is a reception failure in the remote control:
Press the LED button on the remote control to verify if the bidet is operational.

3. If the seat sensor does not detect human skin:
Press the nozzle cleaning button to check if the nozzle comes out (if the nozzle comes out, it is functioning properly).
(Our bidet requires seat sensor (located under your left thigh area) to detect human skin in order for all nozzle function to operate.)

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The bidet is not functioning.

Problems may arise under the following circumstances:

1. If there is no power in the bathroom:
Check if power is coming by plugging in electronic devices like a hairdryer. If power is supplied, unplug the bidet's power cord, wait for 1 minute, and then plug it back in to reset the bidet.

2. If power is not supplied to the bidet:
Check if the POWER LED on the main display panel is lit.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

The circuit breaker is tripping.

Problems may arise under the following circumstances:

1. If the power cord is not properly connected:
Ensure that the power plug is securely inserted into the outlet, as loose connections can cause issues.
(Be sure to use an AC 120V~, 60Hz outlet with proper grounding.)

* TCB-090SA/RTB-090WA/PB-707S/PB-101S : 703W
* TCB-8100W/TCB-8100B : 1180W

2. If there are electrical issues with the bathroom outlet:
Disconnect the bidet power plug from the outlet and plug in another electronic device such as a hairdryer to see if the circuit breaker trips.
→ If the circuit breaker trips, contact the building management or an electrician to inspect the electrical outlet.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

Flushing does not work.

The flushing may not operate properly under the following condition:

1. If the toilet bowl is clogged:
Press the jet button on the manual flush button to check if the toilet bowl is clogged.
(If clogged, there will be no water flow, only bubbles.)

2. If the water pressure in the bathroom is low:
2-1. Adjust the water pressure using the valve connected to the bidet's water supply hose.
(Turn counterclockwise to fully open the valve.)
2-2. Remove the pressure reduction valve for flushing.
(Please refer to the troubleshooting guide No. 21 for instructions on removing the pressure reducing valve.)

3. If water is being used elsewhere simultaneously:
Our bidet operates directly from the customer's water pressure. When water is being used elsewhere (washing machine, sink, shower), it may result in reduced water pressure, affecting drainage.

4. If the original water pressure is low:
Check the water pressure at your home.
(If the pressure is less than 40psi, drainage may not be efficient.)
(To confirm the minimum required water pressure: Open the water supply valve fully and collect water in a container for 10 seconds, then check the quantity (0.95gal).)

5. If a dual valve is installed:
Please refer to troubleshooting guide No. 8 for the correct installation status.


(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

How to clean the nozzle.

The nozzle cleaning method is as follows:

External Nozzle Cleaning (Manual):
Press the nozzle cleaning button on the remote control or control bar to extend the nozzle.
Clean the exposed nozzle with a brush.
After cleaning, press the nozzle cleaning button again to retract the nozzle.

Internal Nozzle Cleaning (Automatic):
Our bidet automatically cleans the interior of the nozzle (posterior, feminine, turbo) once during nozzle usage, and once more after usage is completed.

If the issue persists despite these methods, please contact our chatbot for assistance.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

How to purchase the parts.

1. Please confirm the model name and purchase through our customer support center.
How to confirm the model name: Check the model name written on the back of the bidet unit.
(TCB-090SA, TCB-9100WA, TCB-9100GA, TCB-8200SAW, TCB-8200SAB, PB-707S)

TCB-090SA, TCB-090S, PB-707S, PB-101S, TCB-8100W, TCB-8100B

User Manual

Installation Manual

Installation Manual (French)

Quick Guide

                                                Bidet Toilet Template

Bidet Toilet Seat Template (Elongated, Round)

VB-4000SE, VB-4100SR, VB-3000SE, VB-3100SR, VB-6000SE, VB-6100SR, VB-4000N

User Manual

Installation Manual

Quick Guide

M-001, M-002, M-003

User Manual

User Manual

User Manual

Quick Guide

BD-7700W, BD-7700B, BD-7700G

User Manual

Quick Guide

If you can't solve the problem even
after looking at the FAQ,
try using the VOVO chatbot.